Hybrid Technologies Service Exhibit

Version: April 28, 2026

1. General; Service Schedules.
   1. General. This Service Exhibit is applicable only where Customer orders one of the Lumen services described in the applicable Lumen Service Schedules listed below (“Service”). Lumen is defined for purposes of this Service Exhibit as CenturyLink Communications, LLC d/b/a Lumen Technologies Group or its affiliated entities (“Lumen”). This Service Exhibit incorporates the terms of the Master Service Agreement or other Lumen approved service agreement under which Lumen provides the Services to Customer (the “Agreement”), and in the event of a conflict in any term of any documents that govern the provision of Services, the following order of precedence will apply in descending order of control: the Service Schedule, including the Supplemental Terms (if applicable), this Service Exhibit, the Agreement, any applicable Service Guide, the SLA, and the Service Order(s). Capitalized terms not defined in this Service Exhibit or one of the Service Schedules are defined in the Agreement. These terms are effective as of the time Customer signs the applicable Service Order or upon acceptance of the applicable terms as part of Lumen’s online order process.
   2. Lumen Service Schedules. Customer may purchase the Edge Bare Metal or Lumen Network Storage Services and the applicable Service Attachments for the services will apply.
   3. For Services provided outside the United States, Customer or its local affiliate may be required to enter into a separate local country addendum/agreement (as approved by local authorities) (“LCA”) with the respective Lumen affiliate that provides the local Service(s). Such Lumen affiliate will invoice Customer or its local affiliate for the respective local Service(s).
2. Term; Renewal. Lumen Services have a minimum term which begins on the Service Commencement Date and continues for the period set forth in the relevant Service Order ("Initial Service Term"). The Initial Service Term and any automatic renewal terms are collectively referred to as the "Service Term". The Service Schedules describe the applicable term and renewal information in more detail.
3. Rates; Billing.
   1. Rates. Customer will pay all applicable rates and fees set forth in the relevant Service Order or posted online for self-provisioned Services and as further described in the applicable Service Schedule. Lumen may increase applicable charges at any time in any automatic renewal term or as otherwise provided in a Service Schedule.Charges for certain Services are subject to (a) a property tax surcharge (or substantially similar local equivalent); and (b) a cost recovery fee per month to reimburse Lumen for various governmental taxes and surcharges. Such charges are subject to change by Lumen and will be applied regardless of whether Customer has delivered a valid tax exemption certificate. For additional details on taxes and surcharges that are assessed, visit www.lumen.com/taxes. All invoices will be issued to Customer and paid in the currency specified in the Service Order.
   2. Withholding Tax. Service charges are exclusive of Taxes and presented without reduction for any withholding Tax, all of which are the responsibility of the Customer. If Customer is required by law to make any deduction or withholding of Taxes from any payment due under this Service Exhibit, then Customer must increase the gross amount payable so that, after any deduction or withholding Taxes, the net amount paid to Lumen will not be less than Lumen would have received had no such deduction or withholding been required.
   3. Service Commencement Date. If Lumen partially installs or activates a Service, Lumen reserves the right to commence billing for such Service on a pro rata basis, and if a Service installation is delayed, incomplete or is not usable by Customer through no fault of Lumen or its agents, Lumen will have the right to commence billing as installed and per the Service Commencement Date.
   4. Lumen reserves the right to use dynamic exchange rates to calculate all non-USD billing. This means that the exchange rate published on the day each respective monthly invoice is created will be the exchange rate used to appropriately convert the invoiced amounts from USD to the applicable currency. In the alternative, Lumen reserves the right to adjust exchange rates on a regular basis (i.e. quarterly). Exchange rate adjustments will not be deemed a rate adjustment.
4. Security Obligations.
   1. Lumen has adopted and implemented, and will maintain, a corporate information security program designed to protect Customer data from unauthorized access, use, or disclosure. The program includes formal information security policies and procedures, which are reviewed annually and updated as necessary to address evolving threats. The security measures of the information security program generally apply to Lumen’s systems, facilities and standard services and certain measures may not apply or may be applied differently to customized services, configurations, or environments ordered or as deployed by Customer. Lumen will maintain its information security program in accordance with applicable state, federal and international laws and regulations governing the privacy and protection of data (“Privacy Laws”).
   2. Lumen will not disclose, modify, or access Customer Data, except: (a) as authorized by Customer in connection with the operation of the Services, including requests for support, incident resolution, or to access or use certain tools, features, or functionalities of particular Services; (b) as necessary to provide the Services to Customer, including complying with reasonably and lawful instructions communicated to Lumen, to prevent or address technical problems, or to otherwise comply with the Agreement; or (c) as necessary to comply with subpoenas, court orders or Privacy Laws. To the extent Lumen accesses or handles Customer information, including personally identifiable information, it will do so only as necessary to provide the Services, perform under the Agreement and to comply with applicable law and Privacy Laws, including: (a) configuration, technical, operational and usage data relating to the performance and use of the Services; (b) business contact and similar information necessary for administering the business relationship and Agreement between the parties; and (c) account information required to manage the Services, provide notices, and handle Service invoicing and remittance. Lumen may disclose such information to its affiliates, vendor and subcontractors only as may be required to provide the Services and/or to comply with its contractual obligations, subject to privacy and confidentiality protections no less protective than those in the Agreement or Service Attachments. Lumen may also transfer such information between its operating jurisdictions, including to the United States, solely for the purposes described in this Section.
   3. Customer understands and acknowledges the Services are not designed to any specific security requirements and are not suitable for regulated content, including for the transmittal, storage or maintenance of protected health information consistent with the Health Insurance Portability and Accountability Act (HIPAA), as amended or any other personal or sensitive information. Customer warrants and represents that it will not use the Services to maintain, transmit or store protected health information. Customer will defend Lumen and its affiliates from any claim, demand or action arising in connection with a breach of the foregoing warranty. Customer will also pay any costs of settlement or any damages finally awarded by a court of competent jurisdiction against Lumen and payable to such third party as a result of such claim.
   4. Customer agrees that it has adopted and implemented, and will maintain, a corporate information security program designed to protect its Customer Data from unauthorized access, use, or disclosure. Customer is solely responsible for properly selecting, configuring and using the Services, and taking its own steps to maintain appropriate security, protection and backup of applicable content, information or Customer Data, including encrypting Customer Data or other applicable content. Customer acknowledges that the Customer environment may be configured with varying degrees of security and further acknowledges that it and not Lumen will be responsible for whether the Services and Customer environment are configured in a secure manner, and no security requirements or obligations of Lumen related to any other Lumen Service, including FedRAMP, NIST, FISMA, or other security platforms will apply.
   5. Customer is responsible for: (a) ensuring that it has provided all requisite notices, obtained all requisite consents and otherwise secured any necessary rights for any Customer Data and other Customer information; (b) determining the legal suitability of the Services in light of the type of Customer Data involved; and (c) its and its End Users use of the Services in compliance with applicable law, including Privacy Laws.
5. Equipment.
   1. Customer Provided Equipment. Customer is responsible for selecting, supplying, installing and maintaining Customer equipment used to access the Services or used in connection with the Services, including any systems, or hardware. Customer: (a) will ensure all equipment, hardware and systems are up to date and supportable; and (b) understands that if any Customer Equipment impairs its use of the Service, Customer will remain liable for applicable charges and any otherwise applicable Service Level will not apply.
   2. Lumen Equipment. If Lumen Equipment is installed on a Customer premise or third-party location contracted by Customer:
      1. Lumen or in certain jurisdictions, a Lumen supplier will hold title to the Lumen Equipment. Customer will keep all Lumen Equipment free of liens and will not allow any liens, encumbrances, or claims to be levied against the Lumen Equipment. Neither Customer nor its representatives will attempt in any way to circumvent or otherwise interfere with any security precautions or measures of Lumen relating to the Lumen Equipment.
      2. Customer will retain the risk of loss for, loss of (including, without limitation, loss of use), or damage to, Lumen Equipment, Customer will inform Lumen as quickly as possible and in not less than 24 hours following damage to Lumen Equipment, including during pre-installation storage and will, within 30 days of invoice, reimburse Lumen for (i) replacement value of Lumen Equipment as new at then current prices if the equipment is not capable of repair (as determined by Lumen), or (ii) the repair cost.
      3. Customer will not: (i) change, remove or obscure any labels, plates or insignia, lettering or other markings placed on the Lumen Equipment; (ii) repair, replace or make physical modifications to Lumen Equipment without written authorization from Lumen or Lumen’s supplier; or (iii) alter, disconnect, tamper with, restrict access to, or move the Lumen Equipment from the designated address unless otherwise approved in writing by Lumen.
      4. Customer will: (i) have and maintain all rights, authorizations and consents necessary to enable Lumen to operate and maintain the Lumen Equipment; (ii) at its expense, provide suitable space and proper environmental conditions as recommended by Lumen, including power supply, rack space, HVAC, cabling, lighting necessary for the installation, operation or maintenance of the Lumen Equipment, including cabling for connectivity between Lumen Equipment and the Lumen network devices; (iii) will ensure that exterior surfaces are kept clean and in good condition; (iv) provide Lumen with reasonable access inspection and maintenance; (v) assure Customer premises comply with safety and health standards consistent with industry standards; (vi) maintain adequate security policies and procedures for the Lumen Equipment, network or applications which interface with the Lumen Equipment; (vii) timely provide Lumen and its suppliers with any needed Customer completed import/export documentation and undertakings (including but not limited to acting as the importer of record if requested by Lumen or its suppliers); and (viii) upon any expiration or termination of the applicable Service, Customer will, at the option of Lumen, return the Lumen Equipment at Customer’s expense, or provide all necessary cooperation to allow Lumen to remove the Lumen Equipment from any Customer location(s).
      5. Upgrades. Lumen may periodically upgrade the Lumen Equipment. If Lumen Equipment is located on a Customer premise, Customer must allow Lumen to make these changes within five business days of receipt of the request from Lumen, or Lumen’s obligation to provide the applicable Service in accordance with this Service Exhibit will be suspended until Customer grants Lumen the access required to make changes. Lumen will use commercially reasonable efforts to notify Customer’s technical point of contact prior to emergency changes.
6. Cancellation; Termination; Default. This Section 6 applies in lieu of any other cancellation and termination section, including any available rights of termination that may be in the Agreement.
1. Suspension. Lumen may suspend the affected Service immediately in the event Lumen has a good faith belief that suspension is reasonably necessary to mitigate damage or liability that may result from Customer’s continued use of the Service. In the event Lumen exercises its right to suspend Customer's access to Services, during the period of suspension: (a) Lumen will not take any action to intentionally erase any Customer Data; and (b) applicable charges, including storage charges but not usage charges, if any, will continue to accrue.
2. Cancellation. Except for pay as you go or month to month services, if Customer terminates an ordered Service prior to its Service Commencement Date, Customer will pay a cancellation fee equal to one (1) month's projected MRC or usage, plus all out-of-pocket costs incurred by or imposed upon Lumen (e.g., ordered equipment, licenses, carrier termination charges).
3. Termination. Pay as you go Services are terminable at any time. Month to month Services are terminable upon thirty (30) days prior written notice. Unless otherwise provided in a Service Schedule, and except for any Service subject to a revenue and term commit, if a Service with a term greater than one month is terminated either by Lumen as a result of Customer’s default or by Customer for any reason other than Lumen’s default and prior to the conclusion of the applicable Service Term, then Customer will be liable for: (a) Service charges accrued but unpaid as of the termination date; (b) any out-of-pocket costs incurred by or imposed upon Lumen (e.g., ordered equipment, licenses, carrier termination charges); and (c) an early termination charge equal to 50% of the then current MRC, NRC, and usage charges for the affected Services multiplied by the number of months remaining in the Service Term.
4. Effect of Termination. Customer’s access to the applicable Services will end as of the effective date of expiration or termination of any Service and Lumen will not be responsible for assisting Customer with any transition to an alternative provider. Customer use of any on premise or virtual network appliance(s) and/or other Lumen provided software must immediately cease and all instances must be deleted as of the effective date of termination. Lumen is not responsible for any Customer Data stored or remaining on Lumen infrastructure as of the effective date of termination. Lumen’s enforcement of this provision will survive the termination of the applicable Services.
7. Scheduled Maintenance. This section 7 applies in lieu of any other scheduled maintenance and local access provisions that may be included in the Agreement. Customer acknowledges that the Services may be subject to routine maintenance or repair and agrees to cooperate in a timely manner and provide reasonable access and assistance as necessary to allow such maintenance or repair. Scheduled maintenance windows are identified in the applicable Service Attachment or Website.
8. Liabilities; Disclaimer.
   1. Direct Damages. Except for the payment and indemnification obligations of Customer and subject to the Damages Limitations provision in the Agreement or similar waiver of consequential damages provision, the total aggregate liability of each party arising from or related to the claim will not exceed in the aggregate the total MRCs, NRCs, and usage charges paid or payable to Lumen for the affected Services under the applicable Service Schedule in the twelve (12) months immediately preceding the first event giving rise to the cause of action (“Damage Cap”). Notwithstanding the foregoing, any Security Services provided under the Service Schedule-Security Services will have a sub cap of six (6) months.
   2. Additional Disclaimer of Warranties IN ADDITION TO ANY WARRANTIES DISCLAIMED IN THE AGREEMENT, LUMEN MAKES NO EXPRESS WARRANTIES, WRITTEN OR ORAL, AND DISCLAIMS ALL IMPLIED WARRANTIES PERMITTED UNDER APPLICABLE LAW. ALL OTHER WARRANTIES ARE SPECIFICALLY EXCLUDED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF TITLE AND NON-INFRINGEMENT, THAT PERFORMANCE OF THE SERVICES WILL BE UNINTERRUPTED, ERROR-FREE OR SECURITY INCIDENT FREE, THAT ANY HARDWARE OR SOFTWARE WILL BE ERROR FREE OR COMPATIBLE WITH CUSTOMER SYSTEMS, THAT SERVICE WILL BE FREE FROM LOSS OR LIABILITY ARISING OUT OF HACKING OR SIMILAR MALICIOUS ACTIVITY, THAT ANY SERVICES PERFORMED COMPLY WITH OR SATISFY ANY APPLICABLE GOVERNMENTAL OR INDUSTRY DATA SECURITY OR THAT ANY CONTENT WILL BE SECURE OR NOT OTHERWISE LOST, CORRUPTED, ALTERED OR ACCESSED, INCLUDING TRANSMISSION BETWEEN LUMEN INFRASTRUCTURE AND/OR CUSTOMER’S OWN OR CONTRACTED INFRASTRUCTURE OR CUSTOMER ERRORS OR OMISSIONS IN SELF-PROVISIONING SERVICE. THE PREVIOUS DISCLAIMERS WILL NOT LIMIT CUSTOMER'S ABILITY TO SEEK ANY APPLICABLE SLA REMEDIES. Any obligation of Lumen to defend, indemnify or hold Customer harmless for any intellectual property related claims as may be set forth in the Agreement are hereby disclaimed in their entirety by Customer with respect to the Services.
9. Notices.
   1. Notwithstanding anything to the contrary in the Agreement, Customer acknowledges and agrees that Lumen may also contact Customer via e-mail at the e-mail address provided to Lumen when Customer ordered the Service, and such email may include instructions for use of a private website for posting of such notices, for any reason relating to the Service, including for purposes of providing Customer any notices required under the Agreement. Customer is responsible for maintaining an up to date email address in accordance with the Customer Responsibilities Section below.
   2. Service Notice. Unless otherwise provided in a Service Schedule, all Customer notices for disconnect and termination must be sent via email to Lumen at: BusinessDisconnects@lumen.com and must contain the account name, account number, identification of the Service(s), and Service address(es). Such disconnect and termination is effective thirty (30) days after Lumen’s receipt of the notice. All Customer notices for Service non-renewal and other routine operational notices will be provided in writing to its Lumen sales representative. Failure to provide disconnect, termination and non-renewal notices in accordance with the terms of this Service Exhibit may result in continued charges, and Lumen will not credit charges for such noncompliance.
10. Intellectual Property; Software.
    1. Intellectual Property. Lumen intellectual property and proprietary rights include skills, know-how, modifications, software or other enhancements developed or acquired in the course of configuring, providing, or managing the Service. Each party agrees that it will not, directly or indirectly, reverse engineer, decompile, reproduce or otherwise attempt to derive source code, trade secrets, or other intellectual property from any information, material, or technology or equipment of the other party or its licensors. Nothing in this Service Exhibit or the performance of it conveys, or otherwise transfers any right, title, or interest in any intellectual property or other proprietary rights held by either party or its licensors.
    2. To the extent required by Lumen to provide certain Services, Customer grants to Lumen a non-exclusive, non-transferable, royalty-free license to use, process and execute Customer Technology, and to sublicense Customer Technology to Lumen subsidiaries and affiliates and any third parties providing all or part of the Service on behalf of Lumen.
    3. Lumen Provided Software.
       1. Lumen grants to Customer a limited, nonexclusive, non-transferable, non-sublicensable, revocable, worldwide, subscription-based license during the Service Term to install, test, and use the object code version of any software provided by Lumen to Customer (“Software”) for Customer’s internal use solely in connection with the Services provided under this Service Exhibit and strictly in accordance with all applicable licensing terms and conditions.
       2. Customer acknowledges the Software and Lumen Equipment may contain software or firmware licensed from third parties (“Third Party Software”). Customer agrees that Third Party Software, including any corresponding documentation, will be used strictly in accordance with applicable licensing terms and conditions, as may be updated from time to time or in accordance with mandatory pass through terms or EULAs which, if applicable may be identified in the applicable Supplemental Terms. All rights in and to any Third-Party Software are reserved by and remain with the applicable third parties. In addition, Customer consents to the installation of Third-Party Software on Customer owned and managed systems and agrees to provide appropriate permissions or consent for Lumen to perform the Services. Lumen may assist with initial configuration and/or installation of purchased software. Customer hereby grants Lumen limited authority to act on Customer’s behalf for the purposes of installing and/or making configuration changes within the scope of the applicable Service Order. This authorization will remain in effect until all in scope activities are completed by Lumen. Lumen is not responsible for any hardware issues arising from or related to the installation of Third-Party Software. Lumen makes no representations or warranties whatsoever regarding Third Party Software. Notwithstanding anything to the contrary in the Agreement, Lumen will have no obligation to defend, indemnify or hold Customer harmless, or otherwise liable to Customer in any way, for any claims of infringement of patent, copyright or other intellectual property right related to or arising from the Third Party Software.
       3. Customer will not authorize any third party to use the Lumen Equipment or Software, including without limitation the Lumen APIs. Customer will not use, distribute or modify the Software or Lumen Equipment in any manner that would require that any Software or Lumen Equipment, components of it, or other intellectual property of Lumen or its licensors be (a) disclosed or distributed in source code form, (b) made available free of charge to recipients, or (c) modifiable without restriction by recipients.
    4. Customer Provided Software. If Customer elects to, or if the underlying Service purchased by Customer permits Customer to, use (including and/or making available to End Users) Customer provided and/or licensed software in connection with the Services, including on Lumen Equipment, Customer is solely responsible for (a) selecting, licensing, installing, maintaining software; (b) ensuring adherence to current technical documentation, up to date versions, all applicable licensing terms, requirements, and/or restrictions; and (c) ensuring it has the legal right to use the software in this manner and that Lumen has all necessary permissions to patch and/or provide other managed Services in reliance on Customer’s license if required as part of the Service. Customer’s failure to do so may result in Lumen’s inability to provide the Services and Lumen will have no liability from it. In addition, Lumen reserves the right to require an upgrade or migration, the purchase of additional services and/or charge additional fees at its discretion for continued use of software that does not comply with the above requirements.
    5. Open Source. Certain Software and Lumen Equipment may include open source software and/or publicly distributed software (each, “open source software”), each of which is a separate and independent work and is subject to its own or open source or public license agreement (“Open Source License Agreement”). Customer agrees that open source software is licensed to Customer from the original licensor (and not Lumen) under, and are subject to, the terms of the applicable Open Source License Agreement, which Customer agrees to. Nothing in this Service Exhibit will limit Customer’s rights under, or grants Customer any rights that supersede or expand, the terms and conditions in the applicable Open Source License Agreement. For clarity, this Service Exhibit is not intended to change or restrict the terms of any Open Source License Agreement, and Lumen does not seek to restrict, or receive compensation for, the copying or redistribution of open source software, which is otherwise freely re-distributable to third parties.
    6. Export. Customer will not export the Software or the Lumen Equipment outside the country that Lumen provides the Software or Lumen Equipment to Customer in, or otherwise conduct an “deemed” export as described under the Export Administration Regulations (i.e., Section 734.13), without providing notice to Lumen and receiving Lumen’s prior written authorization.
11. Feedback. In the event Customer elects to communicate to Lumen suggestions for improvements to the Software or Service (“Feedback”), Lumen will own all right, title and interest in and to the Feedback, even if Customer has designated the Feedback as confidential, and Lumen will be entitled to use the Feedback without restriction. Customer irrevocably assigns all right, title, and interest in and to the Feedback to Lumen and agrees to provide Lumen such assistance as it may require to document, perfect and maintain Lumen’s rights to the Feedback.
12. Customer Responsibilities. Customer’s failure to meet the responsibilities in this section, and any additional responsibilities identified in an applicable Service Schedule, may result in Lumen’s inability to provide the Service(s) to Customer and Lumen will not be liable for any failure to perform, including any SLAs in the event of Customer’s failure.
    1. Customer represents that Customer is not (a) located in, under the control of, or a national or resident of any country or territory to which export is prohibited under the laws of any country in which Lumen operates, or (b) on the U.S. Treasury Department List of Specially Designated Nationals or the U.S. Commerce Department's Table of Deny Orders.
    2. Customer agrees that: (a) it will provide accurate and complete information as requested by Lumen in connection with its registration or request for Services, including maintaining up to date, complete and accurate contact information, including an email address for the point of contact reachable 24/7 and should be authorized to make, direct, authorize and/or consent to changes to the Customer’s Service, as applicable; and (b) any registrants, users, or others placing orders for Service on its behalf have full legal capacity to do so and are duly authorized to do so and to legally bind Customer; (c) safeguard the Services so as to ensure that no unauthorized person will have access to it or allow access beyond the authorized number of subscribers, and that no persons authorized to have access will make any unauthorized use; (d) maintain at all times during the Service Term, current Customer information to serve as a technical point of contact available 24x7 with sufficient knowledge, authority and access to address configuration issues, event notifications, system or infrastructure modifications and authentication of applicable Lumen systems; (e) it is solely responsible for and Lumen will have no liability for establishing, maintaining and resolving issues with any network connectivity provided by Customer. Unless public Internet access is included as part of the applicable Service and SLA, any issues with network connectivity provided by Lumen will be resolved in accordance with the terms and conditions associated with such connectivity and are outside the scope of these Services.
    3. Portal Use. Customer is responsible for maintaining the confidentiality of and protecting access to all usernames and passwords it creates or assigns (collectively, “Credentials”) and is solely responsible for all activities that occur under the Credentials, including access to content. Customer agrees to notify Lumen promptly of any actual or suspected unauthorized use of any Credentials. Lumen reserves the right to terminate upon notice any Credentials that Lumen reasonably determines may have been accessed or used by an unauthorized third party. For added security, Lumen recommends two-factor authentication in conjunction with all Credentials.
    4. Unauthorized Testing. Customer will not attempt, permit or instruct any party to take any action that would reduce the effectiveness of Service or any devices used to deliver Lumen services. Without limiting the foregoing, Customer is specifically prohibited from conducting unannounced or unscheduled test firewall attacks, penetration testing or external network scans on Lumen’s network and infrastructure without the prior written consent of Lumen.
    5. Lumen is not responsible for the Service or the SLA if any network, system or security changes by Customer affect the infrastructure or monitoring capability of Lumen.
    6. Customer has all licenses, rights, consents, and permissions that are required for Customer's and any End User's use of any operating systems, software, applications, and any other content that Customer or any End User uploads to or uses in connection with the Service.
    7. Nothing in this Service Schedule or the Agreement grants Customer any rights to, and Customer is expressly prohibited from, reselling the Services or using any component of the Service or any Lumen proprietary materials to create or offer derivative versions of the Service either directly, or through a third party, as a standalone service offering.
13. Acknowledgements.
    1. Lumen’s SLAs only apply to the respective vendors’ supported configurations, operating systems or software at the time SLA support requests are triggered. If any configuration or version is identified as “unsupported” by a vendor, a service level objective (“SLO”) in lieu of any other applicable SLA will apply. Lumen reserves the right to charge the Customer for any support, upgrades or additional tasks/work incurred, resulting from Customers continued use of unsupported configuration. Customer acknowledges and agrees that it is solely responsible for selecting and ensuring its software and systems are up to date and supportable.
    2. Customer acknowledges that all third-party components of the Service are subject to the applicable vendor’s decision to (i) not continue to provide or renew the Service with Lumen and/or (ii) modify or end of life a component(s). If any of the foregoing occurs, Lumen will use commercially reasonable efforts to migrate Customer to another comparable Lumen service at any time. Such migration will occur without regard to Customer’s current Service Term.
    3. Lumen reserves the right to make any updates, error corrections, bug fixes, and other related modifications to the Services at any time upon notice posted on the Website.
14. Definitions. “API” means a Lumen provided Application Programming Interface.
    
    “Customer Data” means any data, content or information of Customer or its End Users that is stored, transmitted, or otherwise processed using the Lumen Services. Lumen’s obligations with respect to such Customer Data will be exclusively governed by the Security Obligations Section 4.1 and are further subject to all Limitation of Liability provisions of this Service Exhibit, the Service Schedule and the Agreement.
    
    "Customer Technology" means the technology, and other information of Customer and its licensors, including Customer's operations design, software tools, hardware designs, algorithms, software (in source and object forms), user interface designs, architecture, class libraries, objects and documentation (both printed and electronic), know-how, trade secrets and any related intellectual property rights throughout the world.
    
    “End User” means Customer’s members, end users or any other third parties who use or access the Services or access Lumen’s network or data centers via the Services.
    
    “Lumen Equipment” means certain Lumen-provided equipment or hardware (e.g. servers, switches, etc.) and related operating software that Customer may access or use either within Lumen infrastructure or installed on a customer premise. Certain Lumen Equipment may be used for the purpose of connecting a Customer endpoint to Lumen managed hosting data center(s) for the delivery of managed services. All Lumen Equipment will be owned or licensed and maintained by Lumen or its suppliers.
    
    “MRC” means monthly recurring charge.
    
    “NRC” means non-recurring charge.
    
    “Portal” means access to the online graphical user interface(s) system utilized in conjunction with the Services. Portal may also refer to interface that Lumen uses to provide services to customers. Certain Portals facilitate order processing, provisioning, management and monitoring, change management, billing, customer support/ticketing and reporting.
    
    “Service Commencement Date” means, for purposes of this Service Exhibit, the date Lumen begins billing for a Service and is the earlier of (a) the date on which Customer uses the Service; (b) the date Lumen notifies Customer in writing that the initial installation or a usable part of it is complete; or (c) the date the Service is activated by Lumen or Customer; or (d) for those Services subject to a revenue commit, the date Customer signs or accepts the applicable Order. The Service Commencement Date will apply in lieu of any other Customer Commit Date, Connection Notice, or similar language in the Agreement. No acceptance period applies.
    
    "Service Guide" (or "SG") means the product-specific Service guide that includes technical descriptions which Lumen may modify from time to time, effective upon posting on the applicable Website. References in the SGs to the CenturyLink TS Services Exhibit will mean this Hybrid Technologies Service Exhibit.
    
    "Service Order" or “Order” means a service order request submitted on a form issued by Lumen and signed or agreed by Customer that includes the type and details of the specific Services ordered by Customer. A Service Order will also mean, the online activation of self-provisioned Services, including (i) submitting a request for Service via “create account”, “activate”, “activate account” or similar request within the portal and self-provisioning requested components; and (ii) agreeing to the applicable order summary or confirmation of Service activation request at the pricing included within the summary or confirmation page by clicking “complete”.
    
    "Service Schedule" means the additional product specific terms for the particular Hybrid Technologies Service(s) purchased by Customer. Service Schedules do not apply unless and until Customer purchases the applicable Service.
    
    “SLA” or "SLA Attachment" or “Service Levels” means the service level agreement applicable to each individual Service, if any, which provides Customer's sole and exclusive remedies for any nonperformance, Service deficiencies, outages, interruptions or failures of any kind. SLAs may be updated from time to time upon posting on the applicable website referenced in the Service Schedule(s).
    
    “Supplemental Terms” means additional terms and conditions that apply for particular Services provided pursuant to a Service Schedule, as may be updated from time to time, effective upon posting.
    
    “Website” means either www.ctl.io or www.lumen.com as applicable or a successor website and as more specifically noted in the applicable Service Schedule.